ASOCRET-M30_Declaration_of_Performance_Schomburg_DIN-EN-998_GB.pdf
2 Pages
72.2 KB
Download
<h1>ASOCRET-M30_Declaration_of_Performance_Schomburg_DIN-EN-998_GB.pdf</h1> <p>Declaration of Performance <br />according Annex III oft he Regulation (EU) No. 305/2011 <br />amended by Commissions delegated Regulation (EU) No 574/2014</p> <p>for the product</p> <p>ASOCRET-M30 <br />205548</p> <p>1.</p> <p>Unique identification code of the product type:</p> <p>DIN EN 998-1:2010-12</p> <p>2. Intended use:</p> <p>normal restoration plaster</p> <p>3. Manufacturer :</p> <p>Schomburg GmbH & Co. KG <br />Aquafinstrasse 2-8 <br />32760 Detmold</p> <p>4. Authorized representative:</p> <p>not relevant</p> <p>5. System or systems of assessment and <br />verification of constancy of performance <br />of the construction product as:</p> <p>System 4</p> <p>6. Notified test laboratory:</p> <p>not relevant</p> <p>7. Harmonised standard :</p> <p>DIN EN 998-1:2010-12</p> <p>8. Declared performance :</p> <p>Performance <br />Essential characteristic <br />Compressive strength <br />Capillary water uptake 24h, <br />prism <br />Coefficient of water-vapor <br />permeability <br />Adhesive tensile <br />strength,28d <br />Image after break <br />Thermal conductivity <br />(average value λ10,dry mat.), <br />average value from table (P <br />50%) <br />Fire reaction <br />Durability (frost resistance)</p> <p>System of assessment <br />and verification of <br />constancy of <br />performance</p> <p>Harmonised <br />technical specification</p> <p>CS IV <br />W2 <br />≤ 25 <br />≥ 0,5 N/mm</p> <p>2</p> <p>A <br />< 0,67 <br />A1 <br />Resistant, by practice <br />according to the technical <br />datasheet</p> <p>System 4</p> <p>DIN EN 998-1:2010-12</p> <p>The performance of the product identified in points 1 and 2 is in conformity with the declared <br />performance in point 8. This declaration of performance is issued under the sole responsibility of the <br />manufacturer identified in point 4.</p> <p>Signed for and on behalf of the manufacturer by: <br />Stefan Flügge, technician <br />(name and function)</p> <p>Detmold, 14.07.2015</p> <p>This declaration of performance was created electronically. It is valid without manual <br />signature.</p> <p>The current material safety data sheet and technical data sheet is downloadable under</p> <p>http://www.schomburg.de/de/Sicherheitsdatenblatt-datenblaetter.html <br />or <br />http://www.schomburg.de/de/Technisches_Merkblatt-datenblaetter.html</p>
