Tile / Natural Stone / Screed installation
MONOFLEX The S class among tile adhesives The flexible MONOFLEX S1 tile adhesive offers security for all demands with the highest quality standards. Problems Solved.
Tile adhesive
Flexible tile adhesive: Security for all demands and a reliable installation. The choice of tile adhesive for bonding various ceramic and natural stone tiles depends on the condition of the substrate and the type of tile. In order to prevent damage due to de-bonding from the substrate, stresses must be compensated for and absorbed by the tile adhesive. MONOFLEX S1 tile adhesive offers security for all demands with the highest quality standards. Whether for everyday requirements, for large format tiles or where there are demanding and time constrained challenges, we have a save solution for all eventualities.
CLASSIFICATION OF TILE ADHESIVES TO DIN EN 12004 – DEFINITIONS C = cement-based adhesive 1 = Adhesive for normal conditions 2 = Adhesive with improved properties F = Fast setting adhesive T = Adhesive with reduced slip (Thixotropic) E = Adhesive with extended open time S1 = deformable thin-bed adhesive, S1 deformation 2.5 mm < t < 5 mm
schomburg.com
MONOFLEX The First-Timer.
12 0 0 4
ry
ve
–
EN
S1 io n
DEFLECT
H
N IO
HIG
Flexible tile adhesive S1 The solid All-Rounder offers good performance and impresses with its good application properties.
l o w e m iss
Properties • Productive. • For large format tiles. • High slump resistance with good application properties. • For underfloor heating. • Interior and exterior. • Wall and floor. • Normal hardening. • Tested to DIN EN 12004, C2 TE S1. • Fulfills the requirements of the AgBB scheme.
Technical data Basis
Sand, cement, additives (polymer modified)
Application/substrate temperature
+5 °C to +25 °C
Pot life*
approx. 2 hours
Ready for foot traffic*
after approx. 12 hours
Ready to grout*
Packaging
25 kg polythene bag
* at +23°C and 50% relative humidity
Smooth to apply High comfort level
Highly polymer modified Very flexible
Material coverage Consumption approx. 1.8 kg/m2 with a 6 mm notched trowel approx. 2.3 kg/m2 with an 8 mm notched trowel approx. 2.8 kg/m2 with a 10 mm notched trowel
High slump resistance For the non-slip installation of tiles
MONOFLEX-XL The one with the high yield.
TILE ry
Flexible, high yield S1 tile adhesive Unites the „more“ in coverage per unit area and excellent application properties.
Properties • High yield. • For large format tiles. • High slump resistance with good application properties. • Very low emissions. • For underfloor heating. • Interior and exterior. • Wall and floor. • Normal hardening. • Fulfills the requirement criteria of the “Flexible adhesive” data sheet. • Tested to DIN EN 12004, C2 TE S1.
High yield Up to 35% less consumption
Material coverage Consumption approx. 1.6 kg/m2 with a 6 mm notched trowel approx. 2.1 kg/m2 with an 8 mm notched trowel approx. 2.6 kg/m2 with a 10 mm notched trowel
MONOFLEX-FB The sociable one.
S1
TILE
Flexible flow-bed adhesive S1 Offers almost void free bedding to floor finishes subjected to high thermal and mechanical stresses.
Properties • Efficient, smooth application. • Accelerated hardening. • Thixotropic, no slumping with large, heavy tiles. • C2 E in accordance with DIN EN 12004. • S1 deformable adhesive to DIN EN 12002. • For interior and exterior. • Fulfills the requirement criteria for the “Flexible adhesive” guidelines.
Aggregate, cement, high quality additives
45 – 50 minutes
after approx. 4 hours
after approx. 6 hours
Material coverage Consumption approx. 3.4 kg/m2 with an 8 mm notched trowel approx. 4.2 kg/m2 with a 10 mm notched trowel
Non-slump No sagging with heavy boards
MONOFLEX-white The white one.
RCHBIE DU
From end of 2022, available in NEW layout
NG GU
HOHE
S1 white flexible tile adhesive White tile adhesive with very good application properties for special demands.
Properties · White. · For large formats. · For underfloor heating. · For indoors and outdoors. · Walls and floors. · Normal-setting. · Tested in accordance with DIN EN 12004, C2 TE S1. · Fulfils AgBB formula requirements.
aggregate, cement, high-quality additives
+5 °C to +30 °C
after approx. 24 hours
after approx. 24 hours minimum
Material coverage Consumption approx. 2.2 kg/m2 with a 6 mm notched trowel approx. 3.0 kg/m2 with an 8 mm notched trowel approx. 3.6 kg/m2 with a 10 mm notched trowel
MONOFLEX-fast Fast-acting. Grey, flexible rapid-setting mortar S1 It has a long working time and open time despite its rapidsetting behaviour.
Properties · Grey. · Rapid setting. · Long working time. · For indoors and outdoors. · Rapid crystalline water binding. · Water and frost/thaw cycle resistant · Tested in accordance with DIN EN 12004, C2 TE S1. · Fulfils AgBB formula requirements.
Aggregate, cement, highquality additives
Application/ Substrate temperature
+5°C to +25°C
approx. 45 to 60 minutes
Foot traffic*
after approx. 3 hours
Groutable*
25 kg foil bag
* at +23 °C and 50 % rel. humidity
Material consumption rate Consumption approx. 2.3 kg/m2 with 6 mm notched trowel approx. 3.1 kg/m2 with 8 mm notched trowel approx. 3.8 kg/m2 with 10 mm notched trowel approx. 5.6 kg/m2 at 12/20 mm semicircular medium bed notched trowel
The SCHOMBURG Group develops, produces and markets high quality building product systems for • Waterproofing and Restoration • Tile / Natural Stone / Screed installation • Surface Protection Systems • Concrete Technology SCHOMBURG is recognised for its development competency and is distinguished both nationally and internationally with over 80 years in the market. System based construction products from its own production plants are held it high esteem throughout the world. Industry professionals value the level of service provided by the SCHOMBURG Group, along with our large range of high quality products.
SCHOMBURG GmbH & Co. KG Aquafinstrasse 2–8 D -32760 Detmold (Germany) phone + 49 - 52 31-953- 00 fax + 49 - 52 31- 953-108 email export@schomburg.de www.schomburg.com
30/22 TS/JD/TET/TaB/SaB Subject to changes. Consult current technical data sheet for most recent information
In order to stay at the forefront of a continuously advancing market we are always investing in research and development of new and current products. This guarantees high quality products, which in turn leads to customer satisfaction.