52.1.9
Page 1/6
Safety data sheet according to 1907/2006/EC, Article 31 Printing date 01.04.2021 *
Version number 7
Revision: 01.04.2021
SECTION 1: Identification of the substance/mixture and of the company/undertaking · 1.1 Product identifier · Trade name: ASOFLEX-SDM (A-Komp.) · 1.2 Relevant identified uses of the substance or mixture and uses advised against No further relevant information available. · Application of the substance / the mixture Sealing · 1.3 Details of the supplier of the safety data sheet · Manufacturer/Supplier: SCHOMBURG GmbH & Co. KG Aquafinstr. 2-8 D-32760 Detmold Germany ---------------------------------------------Tel: ++49 (0)5231/953-00 email: info@schomburg.de web: www.schomburg.de · Informing department: Product Safety Department Tel: ++49 (0)5231/953-193 email: SDB@schomburg.de
*
SECTION 2: Hazards identification · 2.1 Classification of the substance or mixture · Classification according to Regulation (EC) No 1272/2008 The product is not classified, according to the CLP regulation. · 2.2 Label elements · Labelling according to Regulation (EC) No 1272/2008 Void · Hazard pictograms Void · Signal word Void · Hazard statements Void · 2.3 Other hazards · Results of PBT and vPvB assessment · PBT: Not applicable. · vPvB: Not applicable.
SECTION 3: Composition/information on ingredients · 3.2 Mixtures · Description: Composition based on polyetherpolyole. · Dangerous components: Void · Additional information For the wording of the listed hazard phrases refer to section 16. SECTION 4: First aid measures · 4.1 Description of first aid measures · General information Personal protection for the First Aider. · After inhalation Supply fresh air; consult doctor in case of symptoms. · After skin contact Instantly wash with water and soap and rinse thoroughly. · After eye contact Rinse opened eye for several minutes under running water. · After swallowing Do not induce vomiting; instantly call for medical help. · 4.2 Most important symptoms and effects, both acute and delayed No further relevant information available. (Contd. on page 2) GB
Page 2/6
Safety data sheet according to 1907/2006/EC, Article 31 Printing date 01.04.2021
Trade name: ASOFLEX-SDM (A-Komp.) (Contd. of page 1)
· 4.3 Indication of any immediate medical attention and special treatment needed No further relevant information available. SECTION 5: Firefighting measures · 5.1 Extinguishing media · Suitable extinguishing agents CO2, extinguishing powder or water jet. Fight larger fires with water jet or alcohol-resistant foam. Sand · 5.2 Special hazards arising from the substance or mixture No further relevant information available. · 5.3 Advice for firefighters · Protective equipment: Wear self-contained breathing apparatus. SECTION 6: Accidental release measures · 6.1 Personal precautions, protective equipment and emergency procedures Wear protective clothing. · 6.2 Environmental precautions: Do not allow product to reach sewage system or water bodies. · 6.3 Methods and material for containment and cleaning up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). · 6.4 Reference to other sections See Section 7 for information on safe handling See Section 8 for information on personal protection equipment. See Section 13 for information on disposal. *
SECTION 7: Handling and storage · 7.1 Precautions for safe handling Store in cool, dry place in tightly closed containers. Keep away from children. · Information about protection against explosions and fires: No special measures required. · 7.2 Conditions for safe storage, including any incompatibilities · Storage · Requirements to be met by storerooms and containers: Protect from frost · Information about storage in one common storage facility: Please follow the rules of the VCI-Storage-Concept for chemicals. · Further information about storage conditions: None. · Storage class 11 · 7.3 Specific end use(s) No further relevant information available.
SECTION 8: Exposure controls/personal protection · 8.1 Control parameters · Components with critical values that require monitoring at the workplace: The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace. · Additional information: The lists that were valid during the compilation were used as basis. · 8.2 Exposure controls · Appropriate engineering controls No further data; see item 7 MSDS. · Individual protection measures, such as personal protective equipment · General protective and hygienic measures Avoid contact with the eyes and skin. Instantly remove any soiled and impregnated garments. Wash hands during breaks and at the end of the work. (Contd. on page 3) GB
Page 3/6
Trade name: ASOFLEX-SDM (A-Komp.) (Contd. of page 2)
The usual precautionary measures should be adhered to in handling the chemicals. · Breathing equipment: Not necessary if room is well-ventilated. · Hand protection Hand Protection: Nitril-rubber-latex-gloves. · Material of gloves Nitril-rubber-latex-gloves II R: Thickness 0,5mm; Break through time 480 min The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. · Penetration time of glove material The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed. · Eye/face protection Gauze goggles · Body protection: Protective work clothing. *
SECTION 9: Physical and chemical properties · 9.1 Information on basic physical and chemical properties · General Information · Physical state Fluid · Colour: grey · Smell: weak · Odour threshold: Not determined. · Melting point/freezing point: Not determined · Boiling point or initial boiling point and boiling range Not determined · Flammability Not applicable. · Lower and upper explosion limit · Lower: Not determined. · Upper: Not determined. · Flash point: >100 °C · Self-inflammability: Product is not selfigniting. · Decomposition temperature: Not determined. · pH Not determined. · Viscosity: · Kinematic viscosity Not determined. · dynamic: Not determined. · Solubility · Water: Not miscible or difficult to mix · Partition coefficient n-octanol/water (log value) Not determined. · Steam pressure: Not determined. · Density and/or relative density · Density at 20 °C 1.44 g/cm³ · Relative density Not determined. · Vapour density Not determined. · 9.2 Other information · Appearance: · Form: Pasty · Important information on protection of health and environment, and on safety. · Explosive properties: Product is not explosive. · Change in condition · Evaporation rate Not determined. (Contd. on page 4) GB
Page 4/6
Trade name: ASOFLEX-SDM (A-Komp.) (Contd. of page 3)
· Information with regard to physical hazard classes · Explosives · Flammable gases · Aerosols · Oxidising gases · Gases under pressure · Flammable liquids · Flammable solids · Self-reactive substances and mixtures · Pyrophoric liquids · Pyrophoric solids · Self-heating substances and mixtures · Substances and mixtures, which emit flammable gases in contact with water · Oxidising liquids · Oxidising solids · Organic peroxides · Corrosive to metals · Desensitised explosives
Void Void Void Void Void Void Void Void Void Void Void Void Void Void Void Void Void
SECTION 10: Stability and reactivity · 10.1 Reactivity No further relevant information available. · 10.2 Chemical stability · Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications. · 10.3 Possibility of hazardous reactions No dangerous reactions known · 10.4 Conditions to avoid No further relevant information available. · 10.5 Incompatible materials: No further relevant information available. · 10.6 Hazardous decomposition products: No dangerous decomposition products known *
SECTION 11: Toxicological information · 11.1 Information on hazard classes as defined in Regulation (EC) No 1272/2008 · Acute toxicity · LD/LC50 values that are relevant for classification: No dates existing. · Primary irritant effect: No irritant action known. · Serious eye damage/irritation Irritate-effect is possible. · 11.2 Information on other hazards · Endocrine disrupting properties None of the ingredients is listed.
SECTION 12: Ecological information · 12.1 Toxicity · Aquatic toxicity: No further relevant information available. · 12.2 Persistence and degradability No further relevant information available. · 12.3 Bioaccumulative potential No further relevant information available. · 12.4 Mobility in soil No further relevant information available. · 12.5 Results of PBT and vPvB assessment · PBT: Not applicable. · vPvB: Not applicable. (Contd. on page 5) GB
Page 5/6
Trade name: ASOFLEX-SDM (A-Komp.) (Contd. of page 4)
· 12.6 Endocrine disrupting properties The product does not contain substances with endocrine disrupting properties. · 12.7 Other adverse effects · Additional ecological information: · General notes: Water hazard class 1 (Self-assessment): slightly hazardous for water. Do not allow undiluted product or large quantities of it to reach ground water, water bodies or sewage system. *
SECTION 13: Disposal considerations · 13.1 Waste treatment methods · Recommendation The penetration of the product into sewers, water courses or the ground is intended be prevented. Smaller quantities can be disposed with household garbage. Transfer to a permitted waste diposal institution. · Uncleaned packagings: · Recommendation: Disposal must be made according to official regulations.
SECTION 14: Transport information · 14.1 UN number or ID number · ADR, ADN, IMDG, IATA
Void
· 14.2 UN proper shipping name · ADR, ADN, IMDG, IATA
· 14.3 Transport hazard class(es) · ADR, ADN, IMDG, IATA · Class
· 14.4 Packing group · ADR, IMDG, IATA
· 14.5 Environmental hazards:
Not applicable.
· 14.6 Special precautions for user
· 14.7 Maritime transport in bulk according to IMO instruments Not applicable.
· Transport/Additional information:
Not dangerous according to the above specifications.
· UN "Model Regulation":
SECTION 15: Regulatory information · 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture · Directive 2012/18/EU · Named dangerous substances - ANNEX I None of the ingredients is listed. · 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out. GB
(Contd. on page 6)
Page 6/6
Trade name: ASOFLEX-SDM (A-Komp.) (Contd. of page 5)
SECTION 16: Other information These data are based on our present knowledge. However, they shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. · Department issuing data specification sheet: Environment protection department. · Contact: Mr. Guido Herfort · Abbreviations and acronyms: ADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning the International Carriage of Dangerous Goods by Road) IMDG: International Maritime Code for Dangerous Goods IATA: International Air Transport Association GHS: Globally Harmonised System of Classification and Labelling of Chemicals EINECS: European Inventory of Existing Commercial Chemical Substances ELINCS: European List of Notified Chemical Substances CAS: Chemical Abstracts Service (division of the American Chemical Society) LC50: Lethal concentration, 50 percent LD50: Lethal dose, 50 percent PBT: Persistent, Bioaccumulative and Toxic vPvB: very Persistent and very Bioaccumulative
· * Data compared to the previous version altered. GB