Share this page
back

ASODUR-SG3

Epoxy resin barrier primer for damp substrates

Print page

Product details

Description

  • Two component
  • Solvent-free
  • Low viscosity
  • Resistant to damp and water vapour per DIN EN 1504
  • Water and frost resistant
  • Resistant to diluted alkaline solutions, acids, aqueous salt solutions and lubricants
  • Fulfils the requirements of the AgBB task force assessment scheme

Areas of Application

  • For pore blocking priming and sealing of cement-based surfaces
  • For creating levelling, scratch coat compounds and epoxy resin mortars
  • As substrate preparation beneath conventional floor coverings (PVC, linoleum, carpet etc)

Advantages

  • Sprayable with airless spray equipment
  • Broadcasting with quartz sand is not required in every case
  • Adheres very well to matt-damp concrete substrates
  • Can be adjusted with different aggregate sizes
  • Watertight against water under negative pressure up to 3 bar

Consumption:

ca. 400-670 g/m²

Article-No. Color Packaging size Unit/Pallet Repackaging
205049-007 transparent 12 -
205049-006 transparent 10 kg/combination packaging 42 -
205049-005 transparent 1 kg/combination packaging x 6/box 192 -

Downloads

Additional Technical Information
Brochures
Declaration of Performance (DoP)
Environmental Product Declaration (EPD)
Safety Data Sheet (SDS)
Technical Data Sheet
Technical Drawings (DWG)
Technical Drawings (PDF)
Test Reports

Videos

Application of a moisture blocking epoxy resin primer with ASODUR-SG3 without sand broadcasting

References