Installation of porcelain tiles

Porcelain stoneware tiles are designated as tiles with water absorption of ≤ 0.5%. This concerns a fully vitrified laying material with an extremely high density. To install porcelain stoneware tiles, polymer modified bedding mortars are needed in order to produce optimum bonding to the very dense surface of the tile. Grouts with accelerated binding are particularly suitable for the grouting of porcelain stoneware tiles.

Print page

PRIMING

Solvent free universal primer, water and alkali resistant

ASO-Unigrund-GE

LEVELLING

	Self-levelling, cement-based smoothing compound from 2 – 30 mm	SOLOPLAN-30-PLUS
	Non-sag, cement-based, rapid hardening, polymer modified, low shrinkage and creamy smoothing compound, 2 – 50 mm	SOLOCRET-50

DE-COUPLING/INSULATION

Thermally insulating impact sound deadening and de-coupling board, 4/9/15 mm

STEPBOARD

WATERPROOFING

	Flexible, mineral-based, vapour permeable waterproof slurry for areas with increased demands in interior and exterior areas	AQUAFIN-RS300 AQUAFIN-2K/M-PLUS
	One component flexible waterproof slurry, wall/floor	AQUAFIN-1K-PREMIUM

TILE INSTALLATION

	Lightweight, low dust flexible adhesive for thin, medium and thick bed installation techniques	LIGHTFLEX
	Grey, highly flexible adhesive for interior and exterior use	MONOFLEX-XL
	Rapid hardening, ductile flexible adhesive S1	MONOFLEX-fast

GROUTING

	Rapid hardening flexible grout, 3 – 20 mm joint width	CRISTALLFUGE-FLEX
	Mineral-based multi-function flexible grout for tiles, natural stone and other finishes from 1-10 mm joint widths with FAST TECHNOLOGY	CRISTALLFUGE-PLUS
	Silicone sealant for movement joints	ESCOSIL-2000