back

Installation of synthetic stone

Synthetic stones are agglomerates of natural stones, which are bound with cement or resin. A few of these materials have pronounced expansion. As a rule, they can be laid with a highly polymer-modified thin-bed mortar with rapid crystalline binding of the mixing water. A few of these materials, especially those with high serpentinite components can ‘curl’ which can only be prevented by installing with a reaction resin adhesive. Our technical department is available for individual advice.

Print page
PRIMING

Solvent free universal primer, water and alkali resistant

LEVELLING

Smoothing compound from 2 – 30 mm, interior and exterior areas

Levelling compound up to 30 mm

TILE INSTALLATION

Epoxy resin-based, chemical resistant mortar

Deformable, rapid hardening flexible adhesive for heavy duty areas, also for natural stone, with FAST TECHNOLOGY

Flexible natural stone adhesive, modified with 2.0 – 4.2 kg UNIFLEX-F

Polymer dispersion

GROUTING

Mineral-based multi-function flexible grout for tiles, natural stone and other finishes from 1-10 mm joint widths with FAST TECHNOLOGY

Rapid hardening flexible grout, 3 – 20 mm joint width

Silicone sealant for use with natural stone