Installation on substrates with adhesive and paint residues

Water soluble paints and adhesive residues must be removed. Lacquers or oil based paints must be abraded as necessary. Prevent or impede rising damp from the substrate.

Print page

Rapid drying, quartz filled dispersion primer for absorbent and non-absorbent substrates

Universal primer based on epoxy resins


Non-sag, cement-based, rapid hardening, polymer modified, low shrinkage and creamy smoothing compound, 2 – 50 mm

Smoothing compound from 2 – 30 mm, interior and exterior areas


Thermally insulating impact sound deadening and de-coupling board, 4/9/15 mm


Flexible, mineral-based, vapour permeable waterproof slurry for areas with increased demands in interior and exterior areas

One component flexible waterproof slurry, wall/floor


Lightweight, low dust flexible adhesive for thin, medium and thick bed installation techniques

Rapid hardening, highly slump resistant flexible adhesive for interior and exterior use

Flexible natural stone adhesive


Rapid hardening flexible grout, 3 – 20 mm joint width

Mineral-based multi-function flexible grout for tiles, natural stone and other finishes from 1-10 mm joint widths with FAST TECHNOLOGY

Silicone sealant for movement joints

Silicone sealant for discolouration-free elastic jointing